FRONT:

Land Rover Front 2-3" Lift with LT-230 Transfer Case(Discovery & Defender)

LR2418-A2S-F1-DIN (S) $369
LR2418-A2LT-F1-DIN (LT) $389
LR2418-A2XC-F!-DIN (XC) $399

Finished Length Running Position from Face to Face of Flange Including Adapter is 25"

Same Prices for Borg Warner Transfer Cases(Range Rover 89-95). Specify Part # LR2618. Finished Running Length is 27". Custom Lengths Available at the Same Price up to 3". Specify #LR.

Land Rover Front Over 3" Lift with LT-230 Transfer Case

Includes an additional Double Cardon CV and Custom Adapter for Differential.

LR2314-A2S-F1-DIN (S) $599

Same Prices for Borg Warner Transfer Cases. Specify Part # LR2514. Custom Lengths Available at the same price over 3". Specify Part # LR-AA2S-F1-F1.

Front shaft for Land Rovers with 3.5+ of lift

Land Rover Rear up to 6" Lift (Disco,RR & Defender)

LR3338-A2S-F1-DIN (S) $369
LR3338-A2LT-F1-DIN (LT) $389
LR3338-A2XC-F1-DIN (XC) $399

Finished Length Running Position from Face to Face of Flange Including Adapter is 34.25".

Custom Lengths Available at the Same Price.

*NOTE: You must rotate the pinion at the differential to point directly at the output of the transfer case and maintain 3 degree or less U-joint operating angle at the differential. Rotate the pinion by using the adjustable control arms(usually part of the lift kit) or cam bolts.

Spline Choices:

(S) Standard Spline:
Will generally allow for a useable stroke of 3". Can be used in all tube diameters and is the lowest priced.

(LT) Long Travel Spline:
Very similar to the (S), but is 1" longer to allow for a useable stroke of 4".

(XC) Extended Life Spline:
Advantages are a longer stroke of 4.5". The spline is cut for the full length of the stub. This yields more contact area between the slip yoke and spline stub that will net a longer life.

*NOTE: A custom adapter must be used at the output of the transfer case. The prices shown include this adapter.

Specs:

Double Carden CV Drive Shaft
2" Drawn Over Mandrel(DOM) Tube
Custom Adapter for Transfer Case Output
F1 Flange for 1310 Series U-Joint @ Transfer Case
DIN Flange for 1310 Series U-Joint @ Differential